Skip to content
Bahnstraße 65-67/2/2, 2230 Gänserndorf, Österreich | Tel.: +43 (0) 2282 3144|office@vitecpower.com
Vitec Power – Power Supplies Logo
  • Home
  • Products
    • Power Supplies
      • AC-DC Power Supplies
      • DC/DC Power Supplies
      • Programmable Power Supplies
      • High Voltage Power Supplies
      • DC/AC Inverters
      • LED Power
      • Custom Power Supplies
      • Filters & Power Management
      • Battery Simulator
      • DC Electronic Load
    • Vehicle lighting
    • Fuel cells
  • Manufacturers
    • Advanced Energy
      • Artesyn
      • Excelsys
      • Ultra Volt
      • SL Power
    • Calex
      • Applications
        • Battery Management
        • Electrice Vehicle
        • Industrial
        • Railway
        • Robotics
      • Products
        • High/Mid-Range Performance DC/DC Converters
        • Low Power DC/DC Converters
        • Chassis Mount DC/DC Converters
        • AC-DC Power Supplies and Converters
    • Cincon
      • AC/DC Power Supply
        • AC-DC Brick
        • Open Frame
        • Enclosed & Din Rail
        • Wall-Mount & Desk-Top
        • Encapsulated
        • Fanless Power Solution
        • Medical Power-Solution
      • DC/DC Converters
        • DC/ DC Brick
        • DC/ DC Chassis Mount/ DIN Rail
        • DC/ DC Railway Solution
        • DC/ DC Ultra-wide Input
        • DC/ DC High Input Voltage
        • SIL/DIL
        • Accessory
    • Delta Elektronika BV
      • SM-Series
      • ES-Series
      • Interfaces/ Accessories
    • Enedo
      • AC/DC Power Supplies
      • Configurable Multi-Outputs
      • High Power LED Power Supplies
      • Medical Grade Power Supplies
      • LED Drivers
    • NGI
      • Battery Simulators
      • DC Power Supplies
      • DC Electronic Loads
    • Nolden cars & concepts
    • LPA
      • DC/DC Converters (<100 W)
      • DC/DC Converters (>100W)
      • DC/AC Inverters
    • Power System Technology
      • Configurable AC-DC power supply
      • Eurocard Power
      • Enclosed Power
      • Conduction Cooled Power
      • PCB Board / DIN Rail Power
      • Custom Power Solutions
    • SDS High Voltage
    • SFC Energy
      • New fuel cells (Gen.2)
      • fuel cells (Gen.1)
      • batteries
      • Power Supply Solutions
      • Military
    • Vitec dc conversion
      • +/- 10% Input Range
      • 2:1 Wide Input Range
      • 4:1 Ultra Wide Input Range
      • High Isolated
      • SMD Converter
      • DC/DC Devices
      • LED Power
  • Downloads
  • Service
    • About us
    • Vitec Power Team
    • Contact us
    • News
    • All Technical Data
    • Job offers
    • Terms and Conditions
    • Newsletter Registration
    • Disclaimer
  • EN
    • DE
    • CS
    • PL
    • TR
  • Home
  • Products
    • Power Supplies
      • AC-DC Power Supplies
      • DC/DC Power Supplies
      • Programmable Power Supplies
      • High Voltage Power Supplies
      • DC/AC Inverters
      • LED Power
      • Custom Power Supplies
      • Filters & Power Management
      • Battery Simulator
      • DC Electronic Load
    • Vehicle lighting
    • Fuel cells
  • Manufacturers
    • Advanced Energy
      • Artesyn
      • Excelsys
      • Ultra Volt
      • SL Power
    • Calex
      • Applications
        • Battery Management
        • Electrice Vehicle
        • Industrial
        • Railway
        • Robotics
      • Products
        • High/Mid-Range Performance DC/DC Converters
        • Low Power DC/DC Converters
        • Chassis Mount DC/DC Converters
        • AC-DC Power Supplies and Converters
    • Cincon
      • AC/DC Power Supply
        • AC-DC Brick
        • Open Frame
        • Enclosed & Din Rail
        • Wall-Mount & Desk-Top
        • Encapsulated
        • Fanless Power Solution
        • Medical Power-Solution
      • DC/DC Converters
        • DC/ DC Brick
        • DC/ DC Chassis Mount/ DIN Rail
        • DC/ DC Railway Solution
        • DC/ DC Ultra-wide Input
        • DC/ DC High Input Voltage
        • SIL/DIL
        • Accessory
    • Delta Elektronika BV
      • SM-Series
      • ES-Series
      • Interfaces/ Accessories
    • Enedo
      • AC/DC Power Supplies
      • Configurable Multi-Outputs
      • High Power LED Power Supplies
      • Medical Grade Power Supplies
      • LED Drivers
    • NGI
      • Battery Simulators
      • DC Power Supplies
      • DC Electronic Loads
    • Nolden cars & concepts
    • LPA
      • DC/DC Converters (<100 W)
      • DC/DC Converters (>100W)
      • DC/AC Inverters
    • Power System Technology
      • Configurable AC-DC power supply
      • Eurocard Power
      • Enclosed Power
      • Conduction Cooled Power
      • PCB Board / DIN Rail Power
      • Custom Power Solutions
    • SDS High Voltage
    • SFC Energy
      • New fuel cells (Gen.2)
      • fuel cells (Gen.1)
      • batteries
      • Power Supply Solutions
      • Military
    • Vitec dc conversion
      • +/- 10% Input Range
      • 2:1 Wide Input Range
      • 4:1 Ultra Wide Input Range
      • High Isolated
      • SMD Converter
      • DC/DC Devices
      • LED Power
  • Downloads
  • Service
    • About us
    • Vitec Power Team
    • Contact us
    • News
    • All Technical Data
    • Job offers
    • Terms and Conditions
    • Newsletter Registration
    • Disclaimer
  • EN
    • DE
    • CS
    • PL
    • TR

MIL-COTS Cool-Power™ DC/DC converter

High Efficiency and High Density 33 to 50 Watt DC/DC Converters

  1. Home
  2. MIL-COTS Cool-Power™ DC/DC converter
  • PI3106-00-HVMZ

  • PI3108-00-HVMZ

  • PI3109-00-HVMZ

  • PI3111-00-HVMZ

  • PI3106-00-HVMZ

Description

The Cool-Power family’s very high-density isolated DC-DC converters are built on a proprietary ZVS topology using advanced control silicon integration, state-of-the-art planar magnetics and high-performance power semiconductor technology enabling high-switching frequencies.

The Cool-Power® MIL-COTS PI3106 is a very high density isolated DC-DC converter implementing high efficiency soft-switching power architecture. The MIL-COTS PI3106 operates over a wide range input of 16 V to 50 Vdc, delivering 50 W of output power (12 Vout @ 4.2 A), yielding an unprecedented power density of 334 W/in3.

The MIL-COTS PI3106 is available in a space saving surface mountable 0.87″ x 0.65″ x 0.27″ package, achieving ~50% space reduction versus conventional solutions.

Specifications

Input Voltage:
  • 28 V (16 – 50V)
Output Voltage:
  • 12 V Regulated (+/-3% over line / load / temp.)
Output Power:
  • 4.2 A / 50 W
Efficiency:
  • Up to 88%
Input-to-Output Isolation:
  • 2250 V
Output Voltage Trim:
  • Vout +10/-20%
Dimensions:
  • 0.87″ (l) x 0.65″ (w) x 0.265″ (h)22 mm (l) x 16.5 mm (w) x 6.7 mm (h)
Operating Junction Temperature:
  • -55 to 125°C
Storage Temperature:
  • -65 to 125°C

Features

  • Power density 105 W/in2 & 400 W/in3 (16.5 W/cm2 & 25 W/cm3)
  • Very low profile (0.265 in / 6.7 mm)
  • Combines Isolation, Output Regulation & Voltage Transformation into one high density, surface mount Power-System-in-Package (PSiP)
  • Built on proprietary ZVS topology using state-of-the-art technologies to enable switching frequencies in excess of 1 MHz, enabling very small size (0.57in2)
  • Programmable soft-start, remote on/off ENABLE, accurate temperature monitor function
  • Input over-voltage & under-voltage lockout with auto-restart.
  • Over-temperature and output over-voltage protection with auto-restart
  • Dual current limit threshold to protect against short circuits and overload conditions
  • Simple solution with very few external components

Data Sheets

  • PI3106-00-HVMZ Data Sheet – DC-DC Converter

Application Notes

  • AN: 302 – PI310X Product Family Reflow Soldering Guidelines

Evaluation / Carrier Boards

  • PI31xx-xx-EVAL1 Cool-Power® ZVS Isolated DC-DC Converter Evaluation Board Design Guider
  • PI3108-00-HVMZ

Description

The Cool-Power family’s very high-density isolated DC-DC converters are built on a proprietary ZVS topology using advanced control silicon integration, state-of-the-art planar magnetics and high-performance power semiconductor technology enabling high-switching frequencies.

The Cool-Power® MIL-COTS PI3108 is a very high density isolated DC-DC converter implementing high efficiency soft-switching power architecture. The MIL-COTS PI3108 operates over a wide range input of 16 V to 50 Vdc, delivering 33 W of output power (3.3 Vout @ 10 A), yielding an unprecedented power density of 334 W/in3.

The MIL-COTS PI3108 is available in a space saving surface mountable 0.87″ x 0.65″ x 0.27″ package, achieving ~50% space reduction versus conventional solutions.

Specifications

Input Voltage:
  • 28 V (16 – 50V)
Output Voltage:
  • 3.3 V Regulated (+/-3% over line / load / temp.)
Output Power:
  • 10 A / 33 W
Efficiency:
  • Up to 88%
Input-to-Output Isolation:
  • 2250 V
Output Voltage Trim:
  • Vout +10/-20%
Dimensions:
  • 0.87″ (l) x 0.65″ (w) x 0.265″ (h)22 mm (l) x 16.5 mm (w) x 6.7 mm (h)
Operating Junction Temperature:
  • -55 to 125°C
Storage Temperature:
  • -65 to 125°C

Features

  • Power density 88 W/in2 & 334 W/in3 (14 W/cm2 & 20 W/cm3)
  • Very low profile (0.265 in / 6.7 mm)
  • Combines Isolation, Output Regulation & Voltage Transformation into one high density, surface mount Power-System-in-Package (PSiP)
  • Built on proprietary ZVS topology using state-of-the-art technologies to enable switching frequencies in excess of 1 MHz, enabling very small size (0.57in2)
  • Programmable soft-start, remote on/off ENABLE, accurate temperature monitor function.
  • Input over-voltage & under-voltage lockout with auto-restart.
  • Over-temperature and output over-voltage protection with auto-restart
  • Dual current limit threshold to protect against short circuits and overload conditions
  • Simple solution with very few external components

Data Sheets

  • PI3108-00-HVMZ Data Sheet – DC-DC Converter

Application Notes

  • AN: 302 – PI310X Product Family Reflow Soldering Guidelines

Evaluation / Carrier Boards

  • PI31xx-xx-EVAL1 Cool-Power® ZVS Isolated DC-DC Converter Evaluation Board Design Guider
  • PI3109-00-HVMZ

Description

The Cool-Power family’s very high-density isolated DC-DC converters are built on a proprietary ZVS topology using advanced control silicon integration, state-of-the-art planar magnetics and high-performance power semiconductor technology enabling high-switching frequencies.

The Cool-Power® MIL-COTS PI3109 is a very high density isolated DC-DC converter implementing high efficiency soft-switching power architecture. The MIL-COTS PI3109 operates over a wide range input of 16 V to 50 Vdc, delivering 50 W of output power (5 Vout @ 10 A), yielding an unprecedented power density of 334 W/in3.

The MIL-COTS PI3109 is available in a space saving surface mountable 0.87″ x 0.65″ x 0.27″ package, achieving ~50% space reduction versus conventional solutions.

Specifications

Input Voltage:
  • 28 V (16 – 50V)
Output Voltage:
  • 5 V Regulated (+/-3% over line / load / temp.)
Output Power:
  • 10 A / 50 W
Efficiency:
  • Up to 88%
Input-to-Output Isolation:
  • 2250 V
Output Voltage Trim:
  • Vout +10/-20%
Dimensions:
  • 0.87″ (l) x 0.65″ (w) x 0.265″ (h)22 mm (l) x 16.5 mm (w) x 6.7 mm (h)
Operating Junction Temperature:
  • -55 to 125°C
Storage Temperature:
  • -65 to 125°C

Features

  • Power density 105 W/in2 & 400 W/in3 (16.5 W/cm2 & 25 W/cm3)
  • Very low profile (0.265 in / 6.7 mm)
  • Combines Isolation, Output Regulation & Voltage Transformation into one high density, surface mount Power-System-in-Package (PSiP)
  • Built on proprietary ZVS topology using state-of-the-art technologies to enable switching frequencies in excess of 1 MHz, enabling very small size (0.57in2)
  • Programmable soft-start, remote on/off ENABLE, accurate temperature monitor function.
  • Input over-voltage & under-voltage lockout with auto-restart.
  • Over-temperature and output over-voltage protection with auto-restart
  • Dual current limit threshold to protect against short circuits and overload conditions
  • Simple solution with very few external components

Data Sheets

  • PI3109-00-HVMZ Data Sheet – DC-DC Converter

Application Notes

  • AN: 302 – PI310X Product Family Reflow Soldering Guidelines

Evaluation / Carrier Boards

  • PI31xx-xx-EVAL1 Cool-Power® ZVS Isolated DC-DC Converter Evaluation Board Design Guider
  • PI3111-00-HVMZ

Description

The Cool-Power family’s very high-density isolated DC-DC converters are built on a proprietary ZVS topology using advanced control silicon integration, state-of-the-art planar magnetics and high-performance power semiconductor technology enabling high-switching frequencies.

The Cool-Power® MIL-COTS PI3111 is a very high density isolated DC-DC converter implementing high efficiency soft-switching power architecture. The MIL-COTS PI3111 operates over a wide range input of 16 V to 50 Vdc, delivering 50 W of output power (18 Vout @ 3.3 A), yielding an unprecedented power density of 334 W/in3.

The MIL-COTS PI3111 is available in a space saving surface mountable 0.87″ x 0.65″ x 0.27″ package, achieving ~50% space reduction versus conventional solutions.

Specifications

Input Voltage:
  • 28 V (16 – 50V)
Output Voltage:
  • 15 V Regulated (+/-3% over line / load / temp.)
Output Power:
  • 3.3 A / 50 W
Efficiency:
  • Up to 88%
Input-to-Output Isolation:
  • 2250 V
Output Voltage Trim:
  • Vout +10/-20%
Dimensions:
  • 0.87″ (l) x 0.65″ (w) x 0.265″ (h)22 mm (l) x 16.5 mm (w) x 6.7 mm (h)
Operating Junction Temperature:
  • -55 to 125°C
Storage Temperature:
  • -65 to 125°C

Features

  • Power density 105 W/in2 & 400 W/in3 (16.5 W/cm2 & 25 W/cm3)
  • Very low profile (0.265 in / 6.7 mm)
  • Combines Isolation, Output Regulation & Voltage Transformation into one high density, surface mount Power-System-in-Package (PSiP)
  • Built on proprietary ZVS topology using state-of-the-art technologies to enable switching frequencies in excess of 1 MHz, enabling very small size (0.57in2)
  • Programmable soft-start, remote on/off ENABLE, accurate temperature monitor function.
  • Input over-voltage & under-voltage lockout with auto-restart.
  • Over-temperature and output over-voltage protection with auto-restart
  • Dual current limit threshold to protect against short circuits and overload conditions
  • Simple solution with very few external components

Data Sheets

  • PI3111-00-HVMZ Data Sheet – DC-DC Converter

Application Notes

  • AN: 302 – PI310X Product Family Reflow Soldering Guidelines

Evaluation / Carrier Boards

  • PI31xx-xx-EVAL1 Cool-Power® ZVS Isolated DC-DC Converter Evaluation Board Design Guider

How to reach us!

+43 (0) 2282 3144

office@vitecpower.com

Bahnstraße 65-67/2/2
A-2230 Gänserndorf,
Österreich

Vitec Power GmbH

Product News

CFM500S-PM

Cincon Releases CFM500S-PM Models, [...]

CSC01

Cincon CSC01 Current Sharing Module [...]

FC2500 SERIES

EXCELSYS FC2500 SERIES FC25M MEDIC [...]

Social Media

Important Pages

  • Job offers
  • Terms and Conditions
  • Contact us

Copyright Vitec Power GmbH – Webdesign by Ostheimer OG

Page load link
Mit der weiteren Nutzung unserer Webseite erklären Sie sich damit einverstanden, dass wir Cookies verwenden um Ihnen die Nutzerfreundlichkeit dieser Webseite zu verbessern. Weitere Informationen zum Datenschutz finden Sie in unserer Datenschutzerklärung.
In OrdnungDatenschutzerklärung
Mehr über Cookies erfahren
Go to Top