Description

A VTM™ current multiplier puts isolated current multiplication and voltage division directly at the point of load (POL), and an upstream PRM™ regulator controls the factorized bus voltage supplied to the VTM to provide line and load regulation. Together, the PRM and VTM chip set provides the full functionality of a DC-DC converter, but with breakthrough performance and flexibility in a rugged, miniature package.

The MIL-COTS PRM operates from a wide input range of 16 – 50 Vdc, meeting many of the ground vehicle and airborne requirements of MIL-STD-1275 and MIL-STD-704. Rated for 120 W, the 28 V PRM produces a nominal factorized bus voltage of 36 Vdc, controllable over the range of 26 – 50 Vdc. The downstream isolated VTM is available with twelve voltage division ratios from 1:1 to 1:32 and provides the user with flexibility to supply up to 100 A or 120 W at any output voltage from 1 to 50 Vdc in a surface-mount package occupying only 1 square inch.

Input Voltage:
  • PRM: 16 — 50 V
  • VTM: 26 — 50 V
Output Voltage:
  • PRM: 26 – 50 V
  • VTM: 0.8 — 50 V
Output Power (per module):
  • VTM: Up to 100 A
  • PRM: 120 W
Operation:
  • –55°C to 125°C operation
Dimensions per module:
  • 1.28″ x 0.87″ x 0.265″
    (32.5 x 22.0 x 6.73 mm)

Full-Chip PRM

  • Power density up to 312 W/in3
  • 1.3 MHz switching frequency
  • 95% efficiency
  • ZVS buck-boost regulaton
  • Surface-mount or through-hole package
Full-Chip VTM

  • Isolated 1 – 50 V output
  • Fast transient response
  • 3 MHz switching frequency
  • Up to 96.5% efficiency
  • Low noise
  • Surface-mount or through-hole package

Full-Chip PRM
Full- Chip VTM

Full-Chip MIL-COTS PRM
Description Lead Type Product Outline Drawing 3-D Model Drawing
Full-Chip PRM with J-Lead mounting J-Lead PDF | DXF IGS | SAT | STP
Full-Chip PRM with through-hole mounting Through-Hole PDF | DXF IGS | SAT | STP
Full-Chip MIL-COTS VTM
Full-Chip VTM with J-Lead mounting J-Lead PDF | DXF IGS | SAT | STP
Full-Chip VTM with through-hole mounting Through-Hole PDF | DXF IGS | SAT | STP

Evaluation Boards

PRM and VTM Module Part Numbering Diagram UG:003 – PRM and VTM Evaluation Board User Guide

MIL-COTS PRM Customer Evaluation Board
Full Chip
P/N Input

Voltage (V)

 Output

Voltage (V)

 Output

Power (W)

 User Guide
MP028F036M12AL-CB 16.1 * – 50 26 – 50 120 PDF
* Will operate down to 13.5 V after start up ≥ 16 V
MIL-COTS VTM Customer Evaluation Board
Full Chip
P/N Input

Voltage (V)

 Output

Voltage (V)

 Output

Current (A)

 User Guide
MV036F011M100-CB 26 – 50 0.82 – 1.55 100 PDF
MV036F015M080-CB 26 – 50 1.1 – 2.0 80 PDF
MV036F022M055-CB 26 – 50 1.63 – 3.1 55 PDF
MV036F030M040-CB 26 – 50 2.2 – 4.1 40 PDF
MV036F045M027-CB 26 – 50 3.3 – 6.2 27 PDF
MV036F060M020-CB 26 – 50 4.3 – 8.3 20 PDF
MV036F072M017-CB 26 – 50 6.4 * – 10 16.6 PDF
MV036F090M013-CB 26 – 50 6.5 – 12.5 13.3 PDF
MV036F120M010-CB 26 – 50 8.7 – 16.6 10.0 PDF
MV036F180M007-CB 26 – 50 13 – 25 6.7 PDF
MV036F240M005-CB 26 – 50 17.4 – 33 5.0 PDF
MV036F360M003-CB 26 – 50 26 – 50 3.3 PDF
* Low line input voltage 32 V

Input Filters

Input Filter Carrier (Evaluation) Boards

  • MQPI-18-CB1 Carrier Board – Compatible with 28 V Input V•I Chip «-CB» Boards, up to 7 Amps

For Full Chip All Heat Sinks are RoHS Compatible
Description Fin

Height

 P/N Product Assembly Drawing Product Outline Drawing 3-D Model Drawing
Transverse Fins 11 mm 34072 * PDF PDF | DXF IGS | SAT | STP
Transverse Fins 6.3 mm 34073 * PDF PDF | DXF IGS | SAT | STP
Longitudinal Fins 11 mm 34074 * PDF PDF | DXF IGS | SAT | STP
Longitudinal Fins 6.3 mm 34075 * PDF PDF | DXF IGS | SAT | STP
* Push pins not included

Push Pins For Full-Size V•I Chip Modules (100 pieces per package)
All Heat Sinks are RoHS Compatible
Pin Size P/N Product Assembly Drawing Product Outline Drawing
0.051″ – 0.069″ PCB 32434 PDF PDF
0.070″ – 0.104″ PCB 32435 PDF PDF
0.105″ – 0.132″ PCB 32436 PDF PDF
0.133″ – 0.156″ PCB 32437 PDF PDF