Skip to content
Bahnstraße 65-67/2/2, 2230 Gänserndorf, Österreich | Tel.: +43 (0) 2282 3144|office@vitecpower.com
Vitec Power – Power Supplies Logo
  • Home
  • Products
    • Power Supplies
      • AC-DC Power Supplies
      • DC/DC Power Supplies
      • Programmable Power Supplies
      • High Voltage Power Supplies
      • DC/AC Inverters
      • LED Power
      • Custom Power Supplies
      • Filters & Power Management
      • Battery Simulator
      • DC Electronic Load
    • Vehicle lighting
    • Fuel cells
  • Manufacturers
    • Advanced Energy
      • Artesyn
      • Excelsys
      • Ultra Volt
      • SL Power
    • Calex
      • Applications
        • Battery Management
        • Electrice Vehicle
        • Industrial
        • Railway
        • Robotics
      • Products
        • High/Mid-Range Performance DC/DC Converters
        • Low Power DC/DC Converters
        • Chassis Mount DC/DC Converters
        • AC-DC Power Supplies and Converters
    • Cincon
      • AC/DC Power Supply
        • AC-DC Brick
        • Open Frame
        • Enclosed & Din Rail
        • Wall-Mount & Desk-Top
        • Encapsulated
        • Fanless Power Solution
        • Medical Power-Solution
      • DC/DC Converters
        • DC/ DC Brick
        • DC/ DC Chassis Mount/ DIN Rail
        • DC/ DC Railway Solution
        • DC/ DC Ultra-wide Input
        • DC/ DC High Input Voltage
        • SIL/DIL
        • Accessory
    • Delta Elektronika BV
      • SM-Series
      • ES-Series
      • Interfaces/ Accessories
    • Enedo
      • AC/DC Power Supplies
      • Configurable Multi-Outputs
      • High Power LED Power Supplies
      • Medical Grade Power Supplies
      • LED Drivers
    • NGI
      • Battery Simulators
      • DC Power Supplies
      • DC Electronic Loads
    • Nolden cars & concepts
    • LPA
      • DC/DC Converters (<100 W)
      • DC/DC Converters (>100W)
      • DC/AC Inverters
    • Power System Technology
      • Configurable AC-DC power supply
      • Eurocard Power
      • Enclosed Power
      • Conduction Cooled Power
      • PCB Board / DIN Rail Power
      • Custom Power Solutions
    • SDS High Voltage
    • SFC Energy
      • New fuel cells (Gen.2)
      • fuel cells (Gen.1)
      • batteries
      • Power Supply Solutions
      • Military
    • Vitec dc conversion
      • +/- 10% Input Range
      • 2:1 Wide Input Range
      • 4:1 Ultra Wide Input Range
      • High Isolated
      • SMD Converter
      • DC/DC Devices
      • LED Power
  • Downloads
  • Service
    • About us
    • Vitec Power Team
    • Contact us
    • News
    • All Technical Data
    • Job offers
    • Terms and Conditions
    • Newsletter Registration
    • Disclaimer
  • PL
    • EN
    • DE
    • CS
    • TR
  • Home
  • Products
    • Power Supplies
      • AC-DC Power Supplies
      • DC/DC Power Supplies
      • Programmable Power Supplies
      • High Voltage Power Supplies
      • DC/AC Inverters
      • LED Power
      • Custom Power Supplies
      • Filters & Power Management
      • Battery Simulator
      • DC Electronic Load
    • Vehicle lighting
    • Fuel cells
  • Manufacturers
    • Advanced Energy
      • Artesyn
      • Excelsys
      • Ultra Volt
      • SL Power
    • Calex
      • Applications
        • Battery Management
        • Electrice Vehicle
        • Industrial
        • Railway
        • Robotics
      • Products
        • High/Mid-Range Performance DC/DC Converters
        • Low Power DC/DC Converters
        • Chassis Mount DC/DC Converters
        • AC-DC Power Supplies and Converters
    • Cincon
      • AC/DC Power Supply
        • AC-DC Brick
        • Open Frame
        • Enclosed & Din Rail
        • Wall-Mount & Desk-Top
        • Encapsulated
        • Fanless Power Solution
        • Medical Power-Solution
      • DC/DC Converters
        • DC/ DC Brick
        • DC/ DC Chassis Mount/ DIN Rail
        • DC/ DC Railway Solution
        • DC/ DC Ultra-wide Input
        • DC/ DC High Input Voltage
        • SIL/DIL
        • Accessory
    • Delta Elektronika BV
      • SM-Series
      • ES-Series
      • Interfaces/ Accessories
    • Enedo
      • AC/DC Power Supplies
      • Configurable Multi-Outputs
      • High Power LED Power Supplies
      • Medical Grade Power Supplies
      • LED Drivers
    • NGI
      • Battery Simulators
      • DC Power Supplies
      • DC Electronic Loads
    • Nolden cars & concepts
    • LPA
      • DC/DC Converters (<100 W)
      • DC/DC Converters (>100W)
      • DC/AC Inverters
    • Power System Technology
      • Configurable AC-DC power supply
      • Eurocard Power
      • Enclosed Power
      • Conduction Cooled Power
      • PCB Board / DIN Rail Power
      • Custom Power Solutions
    • SDS High Voltage
    • SFC Energy
      • New fuel cells (Gen.2)
      • fuel cells (Gen.1)
      • batteries
      • Power Supply Solutions
      • Military
    • Vitec dc conversion
      • +/- 10% Input Range
      • 2:1 Wide Input Range
      • 4:1 Ultra Wide Input Range
      • High Isolated
      • SMD Converter
      • DC/DC Devices
      • LED Power
  • Downloads
  • Service
    • About us
    • Vitec Power Team
    • Contact us
    • News
    • All Technical Data
    • Job offers
    • Terms and Conditions
    • Newsletter Registration
    • Disclaimer
  • PL
    • EN
    • DE
    • CS
    • TR

V•I Chip™ MIL-COTS PRM & VTM Series

High Efficiency and High Density DC/DC Regulator and Converter for MIL Applications

  1. Home
  2. V•I Chip™ MIL-COTS PRM & VTM Series
  • Overview

  • Data Sheets

  • Library

  • Evaluation Boards

  • Filters

  • Accessories

  • Overview

Description

A VTM™ current multiplier puts isolated current multiplication and voltage division directly at the point of load (POL), and an upstream PRM™ regulator controls the factorized bus voltage supplied to the VTM to provide line and load regulation. Together, the PRM and VTM chip set provides the full functionality of a DC-DC converter, but with breakthrough performance and flexibility in a rugged, miniature package.

The MIL-COTS PRM operates from a wide input range of 16 – 50 Vdc, meeting many of the ground vehicle and airborne requirements of MIL-STD-1275 and MIL-STD-704. Rated for 120 W, the 28 V PRM produces a nominal factorized bus voltage of 36 Vdc, controllable over the range of 26 – 50 Vdc. The downstream isolated VTM is available with twelve voltage division ratios from 1:1 to 1:32 and provides the user with flexibility to supply up to 100 A or 120 W at any output voltage from 1 to 50 Vdc in a surface-mount package occupying only 1 square inch.

Specifications

Input Voltage:
  • PRM: 16 – 50 V
  • VTM: 26 – 50 V
Output Voltage:
  • PRM: 26 – 50 V
  • VTM: 0.8 – 50 V
Output Power (per module):
  • VTM: Up to 100 A
  • PRM: 120 W
Operation:
  • –55°C to 125°C operation
Dimensions per module:
  • 1.28″ x 0.87″ x 0.265″
    (32.5 x 22.0 x 6.73 mm)

Features

Full-Chip PRM

  • Power density up to 312 W/in3
  • 1.3 MHz switching frequency
  • 95% efficiency
  • ZVS buck-boost regulaton
  • Surface-mount or through-hole package
Full-Chip VTM

  • Isolated 1 – 50 V output
  • Fast transient response
  • 3 MHz switching frequency
  • Up to 96.5% efficiency
  • Low noise
  • Surface-mount or through-hole package
  • Data Sheets

Data Sheets

  • 28 V Military COTS PRM
  • Military COTS MV036 Series
  • Library

Applications Notes

  • AN:002 – PRM / VTM Parallel Operation
  • AN:003 – Powering Multiple VTMs with a Single PRM
  • AN:005 – FPA Printed Circuit Board Layout Guidelines
  • AN:009 – V•I Chip Soldering Recommendations
  • AN:017 – RoHS-Compliant Through-hole V•I Chip Soldering Recommendations
  • AN:018 – Providing a Constant Current for Powering LEDs using the PRM and VTM
  • AN:022 – MIL EMI and Transient Solutions

Design Guides / Manuals

  • MIL-COTS 28 V DC-DC V•I Chip Modules Brochure
  • UG:003 – MIL-COTS PRM & VTM Evaluation Board User Guide

White Papers

  • FPA Overview: An Introduction to FPA
  • High-Density, High-Efficiency, Light-Weight MIL-COTS DC-DC Solution

Safety Approvlals

Full-Chip PRM
  • cURus – UL 60950-1, CSA 60950-1
  • cTÜVus – EN 60950-1, UL 60950-1, CSA 60950-1
  • CE Marked – Low Voltage Directive (2006/95/EC)
  • CB Certificate – IEC 60950-1:2001
Full- Chip VTM
  • cURus – UL 60950-1, CSA 60950-1
  • cTÜVus – EN 60950-1, UL 60950-1, CSA 60950-1
  • CE Marked – Low Voltage Directive (2006/95/EC)
  • CB Certificate – IEC 60950-1:2001

Mechanical Drawings and Models

Full-Chip MIL-COTS PRM
Description Lead Type Product Outline Drawing 3-D Model Drawing
Full-Chip PRM with J-Lead mounting J-Lead PDF | DXF IGS | SAT | STP
Full-Chip PRM with through-hole mounting Through-Hole PDF | DXF IGS | SAT | STP
Full-Chip MIL-COTS VTM
Full-Chip VTM with J-Lead mounting J-Lead PDF | DXF IGS | SAT | STP
Full-Chip VTM with through-hole mounting Through-Hole PDF | DXF IGS | SAT | STP
  • Evaluation Boards

Evaluation Boards

PRM and VTM Module Part Numbering Diagram UG:003 – PRM and VTM Evaluation Board User Guide

MIL-COTS PRM Customer Evaluation Board
Full Chip
P/N Input

Voltage (V)

Output

Voltage (V)

Output

Power (W)

User Guide
MP028F036M12AL-CB 16.1 * – 50 26 – 50 120 PDF
* Will operate down to 13.5 V after start up ≥ 16 V

 

 

MIL-COTS VTM Customer Evaluation Board
Full Chip
P/N Input

Voltage (V)

Output

Voltage (V)

Output

Current (A)

User Guide
MV036F011M100-CB 26 – 50 0.82 – 1.55 100 PDF
MV036F015M080-CB 26 – 50 1.1 – 2.0 80 PDF
MV036F022M055-CB 26 – 50 1.63 – 3.1 55 PDF
MV036F030M040-CB 26 – 50 2.2 – 4.1 40 PDF
MV036F045M027-CB 26 – 50 3.3 – 6.2 27 PDF
MV036F060M020-CB 26 – 50 4.3 – 8.3 20 PDF
MV036F072M017-CB 26 – 50 6.4 * – 10 16.6 PDF
MV036F090M013-CB 26 – 50 6.5 – 12.5 13.3 PDF
MV036F120M010-CB 26 – 50 8.7 – 16.6 10.0 PDF
MV036F180M007-CB 26 – 50 13 – 25 6.7 PDF
MV036F240M005-CB 26 – 50 17.4 – 33 5.0 PDF
MV036F360M003-CB 26 – 50 26 – 50 3.3 PDF
* Low line input voltage 32 V
  • Filters

Input Filters

  • M-FIAM7 Data Sheet – 10 Amp Filter, with input voltages from 14 – 50 Vdc, for 28 V V•I Chip products
  • MQPI-18LP Data Sheet – 7 Amp EMI Filter, for 28 V V•I Chip products

Input Filter Carrier (Evaluation) Boards

  • MQPI-18-CB1 Carrier Board – Compatible with 28 V Input V•I Chip “-CB” Boards, up to 7 Amps
  • Accessories

Heat Sinks

For Full Chip All Heat Sinks are RoHS Compatible
Description Fin

Height

P/N Product Assembly Drawing Product Outline Drawing 3-D Model Drawing
Transverse Fins 11 mm 34072 * PDF PDF | DXF IGS | SAT | STP
Transverse Fins 6.3 mm 34073 * PDF PDF | DXF IGS | SAT | STP
Longitudinal Fins 11 mm 34074 * PDF PDF | DXF IGS | SAT | STP
Longitudinal Fins 6.3 mm 34075 * PDF PDF | DXF IGS | SAT | STP
* Push pins not included

Push Pins

Push Pins For Full-Size V•I Chip Modules (100 pieces per package)
All Heat Sinks are RoHS Compatible
Pin Size P/N Product Assembly Drawing Product Outline Drawing
0.051″ – 0.069″ PCB 32434 PDF PDF
0.070″ – 0.104″ PCB 32435 PDF PDF
0.105″ – 0.132″ PCB 32436 PDF PDF
0.133″ – 0.156″ PCB 32437 PDF PDF

How to reach us!

+43 (0) 2282 3144

office@vitecpower.com

Bahnstraße 65-67/2/2
A-2230 Gänserndorf,
Österreich

Vitec Power GmbH

Product News

CFM500S-PM

Cincon Releases CFM500S-PM Models, [...]

CSC01

Cincon CSC01 Current Sharing Module [...]

FC2500 SERIES

EXCELSYS FC2500 SERIES FC25M MEDIC [...]

Social Media

Important Pages

  • Job offers
  • Terms and Conditions
  • Contact us

Copyright Vitec Power GmbH – Webdesign by Ostheimer OG

Page load link
Mit der weiteren Nutzung unserer Webseite erklären Sie sich damit einverstanden, dass wir Cookies verwenden um Ihnen die Nutzerfreundlichkeit dieser Webseite zu verbessern. Weitere Informationen zum Datenschutz finden Sie in unserer Datenschutzerklärung.
In OrdnungDatenschutzerklärung
Mehr über Cookies erfahren
Go to Top