The HAM module is a full-wave rectifier with a proprietary high frequency zero-current switching (ZCS) boost converter providing up to 675 watts of power in a package measuring only 2.4″ x 4.6″ x 0.5″.
The combination of the High Boost HAM-xL and our V375, VI-26x or VI-J6x DC-DC converters provides the power train for a high density, switching power supply meeting EN61000-3-2 requirements for harmonic current content with a power factor better than 0.99. The user need only add Vicor’s 30205 line filter and hold-up capacitance.
Input Voltage:
- 85 – 264 Vac: 50/60 Hz
Output Power(per module):
- Up to 675 W
Efficiency:
- up to 94% (typical)
Dimensions(full brick):
- 4.6″ x 2.4″ x 0.5″ (116,9 x 61,0 x 12,7 mm)
Configurations:
- HAM-xx Driver HAM – Fully configured power factor correcting front end.
- HAMD-xx Driver HAM – No internal bridge rectifier or synchronization diodes.
- BAMD-xx Booster HAM – Companion module to HAMD-xx used for additional output power. No internal bridge rectifier.
- Near unity power factor
- Meets EN61000-3-2 for line current harmonic content
- Short circuit protection
- Input surge limiting with recommended filter
- Module enable
- Universal input: 85 to 264 Vac
- cTÜVus – EN 60950-1, UL 60950-1, CSA 60950-1
- CB Certificate – IEC 60950-1:2001
- CE Marked – Low Voltage Directive (2006/95/EC)
- CE Marked – Low Voltage Directive (2006/95/EC) and RoHS Recast Directive (2011/65/EU)
- cURus – UL 60950-1, CSA 60950-1
Mechanical Drawings
| HAM Modules | ||||
| 2-D Full-Size VI-200 / VE-200 DC-DC Converter Module Drawings | ||||
| Drwg. Number | Description | Download | RoHS | |
| 05429 | Outline drawing for HAM Module | DXF | PDF |  |
|
| 3-D Full-Size VI-200 / VE-200 Module (referring to drawing number 05429) | ||||
| Non-RoHS, HAM Module (VI-200 series size package) | STEP | 3D PDF | |||
| RoHS, HAM Module (VI-200 series size package) | STEP | 3D PDF | |
||
 |
||||
| HAM Filter Module | ||||
| Drwg. Number | Description | Download | RoHS | |
| 32723 | Outline drawing for HAM Filter Module | DXF | PDF | |
|
| Description | P/N | Capacitance | Height of HUB |
RoHS | Technical Drawing | ||||||
 |
Holdup Box | HUB270-P | 270 µF | 1.75″ | |
PDF | DXF | |||||
| Holdup Box | HUB470-P | 470 µF | 2.34″ | |
PDF | DXF | ||||||
| Holdup Box | HUB820-P | 820 µF | 3.52″ | |
PDF | DXF | ||||||
| HUB contains two (2) capacitors of the value shown. | |||||||||||
|
|||||||||||
| Mounting Connector Kit | |||||||||||
| Kit includes one connector and pins | 21395 | |
|||||||||
| Description | P/N | Voltage Rating | Current Rating | RoHS | Technical Drawing | ||||||
 |
Bridge Rectifier | 30660 | 600 V | 1 V | |
PDF | – |
| Heat sinks used with Vicor’s BatMod module (not for Maxi modules) | |||||||
| Description | P/N | RoHS | Technical Drawing | ||||
 |
0.90″ Longitudinal Fins | 30089 | |
PDF | DXF | |||
 |
|||||||
 |
0.90″ Transverse Fins | 30090 | |
PDF | DXF | |||
|
|||||||
 |
0.70″ Longitudinal Fins | 30775 | |
PDF | DXF | |||
|
|||||||
|
0.70″ Transverse Fins | 30193 | |
PDF | DXF | |||
|
|||||||
 |
1.45″ Longitudinal Fins | 30780 | |
PDF | DXF | |||
|
|||||||
 |
0.40″ Transverse Fins | 30194 | |
PDF | DXF | |||
| Heat Sink Thermal Data and Calculator » | |||||||
|
|||||||
| ThermMate Thermal Pads (10 pieces per package) | |||||||
| Description | Thickness | P/N | RoHS | Technical Drawing | |||
 |
For use with Vicor BatMod modules* | 0.007″ | 20266 | |
– | ||
| * NOT for use with Vicor Maxi modules | |||||||
|
|||||||
| Grounding Clips | |||||||
| Description | P/N | RoHS | Technical Drawing | ||||
 |
For use with FinMod, Longitudinal 0.25″ Fins (-F1) | 32185 | |
PDF | DXF | |||
| For use with FinMod, Longitudinal 0.50″ Fins (-F2) | 32185 | |
PDF | DXF | ||||
| For use with FinMod, Transverse 0.25″ Fins (-F3) | 32186 | |
PDF | DXF | ||||
| For use with FinMod, Transverse 0.50″ Fins (-F4) | 32186 | |
PDF | DXF | ||||
| For use with SlimMod Flangless package (-S) | 32187 | |
PDF | DXF | ||||