Advanced Energy’s UltraVolt XS series of regulated DC-to-DC supplies provides modest high voltage power in a convenient, micro-size package. 

  • Maximum Output Voltage/Power: 0.1 kV DC/0.1 W
  • Type: Single output
  • Ripple: < 500 ppm
  • Control Interface: Analog
  • Temperature Coefficient: 50 ppm/⁰C


Overview

  • Our XS series is the smallest regulated DC-to-DC high voltage power supply. Designed for applications that require bias voltage ranging from 0 to 100 V. Only 1.3 cm3 (0.081 in3) and 5 g (0.17 oz), this module is ideal for applications where portability, weight, and space are at a premium.

    From a 5 VDC input, the XS series provides 0 to 100 VDC of single-output voltage, and up to 0.1 W (100 mW) of power. Available in positive or negative output polarities. Control voltage output with overcurrent protection and 0 to 2.5 VDC analog interface.

Benefits

  • Meet design requirements for size and weight
  • Deliver better performance and temperature stability than proportional-control power supplies
  • Simplify control using board-level signals (0 to 2.5 VDC)
  • Increase power subsystem robustness and reliability
  • Protect against external RF and EMI noise

Features

  • Small, lightweight, PCB-mountable package (1.3 cm3; 5 g)
  • Output ripple < 100 ppm, with Temperature Coefficient < 50 ppm/⁰C
  • Analog interface with output voltage control
  • Integrated overcurrent protection
  • Tin-plated metal enclosure

Electrical

Output Voltage Range 0 to 100 VDC (adjustable, regulated HVout)
Input Voltage 5 VDC (positive polarity only)
High Voltage Outputs Single (positive or negative polarity)
Maximum Power Output 0.1 W
Temperature Coefficient 100 ppm/⁰C


Environmental

Operating Temperature Range -10 to 65 ⁰C (14 to 149 ⁰F) case temperature
Storage -10 to 70⁰C (14 to 158⁰F) case temperature
Humidity 0 to 95% RH, non-condensing


Mechanical

L x W x H 11 x 10.6 x 10.7 mm (0.43 x 0.42 x 0.42 in)
Volume 1.3 cm3 (0.08 in2)
Weight 5 g (0.17 oz)
Case Construction Tin-plated steel
Encapsulation Silicone-based RTV


Interface

Interface Analog (positive or negative polarity)
Control Signal Levels Voltage: 0 to 2.5 VDC (full-scale)
Control Accuracy Voltage Output: ± 2%