Advanced Energy’s UltraVolt M series of regulated DC-to-DC supplies provide high voltage power in a lightweight, low-profile, and PCB-mountable package. 

  • Maximum Output Voltage/Power: 3 kV DC/1 W
  • Type: Single output
  • Ripple: 100 ppm
  • Control Interface: Analog
  • Temperature Coefficient: 100 ppm/⁰C


Overview

  • The UltraVolt M series is ideal for biasing applications where clearance height is limited. It features seven models offering 600 to 3000 VDC of maximum high voltage power. The modules are available in either single-output positive or negative polarities and deliver up to 1 W of power from a 5, 12, 15, or 24 VDC input. Protection against reversed input polarity, short circuits, and arcing is standard. Flying lead outputs and enhanced analog interfaces, which include current monitoring and enable/disable output control, are available.

Benefits

  • Meet product packaging requirements
  • Design power subsystems around product needs — not high voltage module constraints
  • Achieve higher precision than proportional-control high voltage supplies
  • Enhance application performance through responsive control of high voltage output
  • Increase power subsystem robustness and reliability

Features

  • Low profile, lightweight, PCB-mountable package
  • Wide selection of input and output voltage configurations
  • Low output ripple, temperature coefficient, and line regulation (Analog interface with integral voltage control and voltage/current monitors
  • Integrated reverse input polarity, short-circuit/arc, and overcurrent protection

Electrical

Input Voltage 5, 12, 15, or 24 VDC (positive polarity only)
High Voltage Outputs Single (positive or negative polarity)
Maximum Power Output 0.5, 0.8, or 1 W
Temperature Coefficient 100 ppm/⁰C


High Voltage Output Range

0.6M 0 to 600 VDC
1M 0 to 1000 VDC
1,25M 0 to 1250 VDC
1,5M 0 to 1500 VDC
2M 0 to 2000 VDC
2,5M 0 to 2500 VDC
3M 0 to 3000 VDC

 

Ripple

0.6M < 100 ppm
1M < 100 ppm
1,25M < 100 ppm
1,5M < 100 ppm
2M < 100 ppm
2,5M < 100 ppm
3M < 100 ppm


Environmental

Operating Temperature Range -10 to 65⁰C (14 to 149⁰F) case temperature
Storage -40 to 70⁰C (-40 to 158⁰F) case temperature
Humidity 0 to 95% RH, non-condensing


Mechanical

L x W x H 47 x 28 x 12 mm (1.85 x 1.10 x 0.47 in)
Volume 16.4 cm3 (1.0 in3)
Weight 35 g (1.2 oz)


Interface

Interface Analog (positive or negative polarity), -EI interface option available
Control Signal Levels Voltage: 0 to 2.5 VDC or 0 to 5 VDC (full-scale) depending on module-supply voltage

Current: Monitoring via either a 0 to 2.5 VDC or 0 to 5 VDC return signal depending on model
Control Accuracy Voltage Output: ± 0.1%
Monitor Accuracy Voltage Output: ± 2; Current Output: ± 2 (-EI interface only)
HV Output Enable/Disable Yes  (-EI interface only)


Options & Accessories

Flying Leads Shielded and unshielded cables to safely route high voltage output to where it is needed, without system redesign