- Very high reliability, designed for long life at full power
- EMC surpasses CE requirements: low emission & high immunity
- Excellent dynamic response to load changes
- Protected against all overload and short circuit conditions
- Very low output ripple and spikes
- Redundant parallel operation with undervoltage alarm contact
- Screwdriver adjustable or analog programmable
- Parallel and series operation
- Convection cooling
- 19” rack mounting or wall mounting
- Remote sensing
| Single phase input | 198-264 Vac (48-62 Hz) 99-132 Vac (48-62 Hz) |
| Active Power Factor Correction (PFC) | up to 0.76 (at 100% load) |
| Efficiency | up to 89% (at full load) |
| Output ripple and spikes | from 7 mVrms / 20 mVpp |
| Regulation | from 10 mV (0-100% load step) |
| Recovery time | from 300 μs (50-100% load step) |
| Stability | 30.10-5 |
| MTBF | up to 1.000.000 hrs |
| Operating ambient temperature | -20 to +50 °C, derate current linearly to 20% at 75 °C |
| Power supply standard | EN 61204-3 |
| Generic Emission | EN 61000-6-3 (EN 55022B) |
| Generic Immunity | EN 61000-6-2 |
| Safety | EN 60950 / EN 61010 |
| Insulation input / output | 3750 Vrms |
| Enclosure | IP20 |
Width = 433 mm
Height = 88 mm
Depth = 385 mm
Weight = 11 kg
| Partnumber | Voltage range | Current range |
|---|---|---|
| 600 S 24 | 12 – 15 V 24 V 30 V |
30 A 25 A 20 A |
| Downloads | Document format | Size |
|---|---|---|
| Data sheet 600S-Series | PDF (Acrobat Reader) | 261.6 KB |
