Advanced Energy’s Excelsys CS1000 fanless power supplies deliver up to 1000 W and eliminate acoustic noise and vibration for medical, clinical, scientific, and industrial applications.

  • 1000 W with natural convection cooling only
  • Meets industrial and medical standards
  • User selectable (5 V/12 V) 24 W always-on auxiliary power output
  • Analog and digital management — PMBus™ monitoring and control capability
  • 94% efficiency
  • Five-year warranty
  • User-configurable


Overview

  • The CS1000 fanless power supplies deliver up to 1000 W with natural convection cooling. Available with 24-volt or 48-volt single outputs, the CS1000 operates off a universal AC input voltage of 85 to 264 VAC. The series provides intelligent analog and digital control and monitoring with PMBus™ (an open-standard digital power management capability). Control and monitoring features include AC fail, global remote/off, output voltage/current control as well a large suite of protection features, such as over-voltage, over-current, short-circuit, and over-temperature.

    The CS1000M is certified for IEC60601-1 third edition and IEC60601-1-2 fourth edition (EMC) for medical applications. It also provides 2xMOPP, 4K VAC primary to secondary isolation as well as <300 uA leakage current. The CS1000S carries IEC60950 safety approvals and is also certified for the upcoming IEC62368-1 industrial safety standard

Benefits

  • High Power Density: 1000 W in a U-channel
  • Full Safety Agency Approvals: See data sheet for details
  • Intelligent Digital Power: Access maximum flexibility with analog and digital control (PMBus™)
  • User- and Field-Configurable: Configure outputs to setpoint voltages; connect in parallel/series for higher output current and/or voltages
  • High Reliability and Efficiency: 94% efficiency helps ensure quality, reliability, and a low total cost of ownership

Features

  • Fanless, no acoustic noise or vibrations
  • 94% efficiency
  • PMBus™ digital communications and control
  • Optional low leakage (<150 uA)
  • N+1 redundancy ready

Electrical

Input Voltage Range 85 to 264 VAC
Input Current 25 A (je nach Modell)
Output Power 1000 W (je nach Modell)
Output Voltage 22 to 28 and 44 to 56 (je nach Modell)

Ripple and Noise

 1% of nominal

Environmental

Operating Temperature Range -40 to +85°C
Storage Temperature Range -40 to +85°C
Relative Humidity 5 to 95%

 
Mechanical

L x W x H
  • Without Lid: 262 x 127 x 39.1 mm (10.3 x 5 x 1.5 in)
  • With Lid: 262 x 127 x 40.8 mm (10.3 x 5 x 1.6 in)

Certifications and Standards

ITE: 62368
Medical: 60601

 
Interface

16 way connector, voltage controal via potentiometer