Artesyn Embedded Power is a company in AC-DC Power Supplies and DC-DC Converters. All of these power supply products carry the well-known brand names Astec or Artesyn and are known for their excellent performance, reliability and cost-effectiveness. Our portfolio of AC-DC power supplies is particularly extensive (3 to 960 watts low and medium power / output power of up to 24,000 watts medium to high power). Our portfolio of DC/DC conversion products includes an extremely wide range of isolated DC/DC converters. We also produce high voltage quarter-brick, half-brick and full-brick DC-DC converter modules for application specific power supplies in specialty markets such as avionics and railroad, along with complementary line of power factor correction (PFC). Module.
product overview Artesyn
![Artesyn_rgb](https://www.vitecpower.com/wp-content/uploads/2023/01/Artesyn_rgb.png)
Image
Description
Datasheet
Power
Input Voltage
Output Voltage
- Fanless - Conduction cooling for sealed box application (4P suffix)
- Airflow/convection cooling (suffix 7P) IP64 rated
- User selectable remote ON/OFF logic
- Output adjustment: ±10%
250 W90 V to 264 V10.8 V to 55.2 V- 2 phase design
- Dual or single output configuration possible
- High efficiency up to 96%
- Small size 27.5 mm x 12.8 mm x 13.4 mm (LxWxH)
350 W7.5-14 Vdc0.5 to 5Vdc- 100W continuous power
- High efficiency 91.5%
- 36 to 160 VDC wide-range input
- No minimum load requirement
100 W36 to 160 V4.5 V - 56.7 V- 2000 W output power
- High power and short form factor
- 1U power supply
- High density design: 62 W/in
2000 W-40 to -72 VDC11.8 V - 12.8 V- 350W peak power
- Inexpensive
- Industrial/Medical Security
- High efficiency 91%
300 W90 V to 264 V9.6 V to 57.6 V- 150W continuous power
- High efficiency 90%
- 36 to 160 VDC wide-range input
- No minimum load requirement
150 W36 to 160 V4.5 V - 59.4 V- 504 W continuous power
- High efficiency: 93% (typical)
- High reliability
- Standard full brick outline
500 W86 V to 264 V10.8 V to 13.2 V- Short circuit protection
- Over voltage protection (OVP)
- Over current protection (OCP)
- Over temperature protection (OTP)
4,000 W90 V to 264 V0.5 V to 57.6 V- 600W single output with 5VDC standby
- Conduction Cooled / No Fan
- -40 to 85°C baseplate temperature (no derating)
- Industrial/Medical Safety Approvals
600 W90 V to 305 V12 V to 54 V- 600W mass output
- Inexpensive
- Convenient size 2.4 x 4.5 x 7.5
- Industrial/Medical Safety Approvals
600 W90 V to 264 V57.6 V- Output voltages from 1 to 20 kV
- Input DC noise rejection filter
- Small footprint and modular design
- Efficient and reliable operation
10 W1 A, max1 to 20 kV- 1000 W output power without derating
- Inexpensive
- Intelligent variable speed fans
- DSP controlled
1,000 W90 V to 264 V10.8 V to 52.8 V- Dual input backup
- Medical Type BF Ready
- Active power factor correction, 61000-3-2 compliant
- Built-in class B EMI filter
650 W90 V to 264 V12 V to 52.8 V- Delivering up to 25 A output
- Ultra-high efficiency 95.5% typ. at full load
- Wide input range: 36 ~ 75 Vdc
- No minimum load requirement
700 W36 V to 75 V14 V to 33 V- 1500 watt output power without derating
- Inexpensive
- 12 watts per cubic inch
- Industrial/Medical Safety Approvals
1,500 W90 V to 264 V52.8 V- Full medical EN60601 approval
- High power density (8.8 W/cu-in)
- Voltage adjustment on all outputs
- Configurable current limit
Up to 1500 W85 to 264 Vac 120 to 300 VdcUp to 21- 1200 W full power at elevated temperatures
- Wide operating temperature range (-40°C to 85°C baseplate)
- Adjustable output
- Remote output On/Off
2100 W90 to 264 VAC24 V to 30 V- Highly accurate droop + active current sharing
- Houses 6 x 3000 W power modules and a removable shelf controller
- Very high efficiency
- Accepts 3 types of input configurations (3P Delta 4 W, 3P Wye 5 W, 3 x of 1P)
6 x 3000 W346 to 480 VAC 3 phase 5 wire Wye (3ph + N + E) / 200 to 277 VAC 3 phase 4 wire Delta (3ph + E)50.5 VDC- +/- 25% adjustment range
- Inexpensive
- -40°C to +70°C with derating
- DSP controlled
3,000 W90 V to 264 V2.4 V to 60 V- High power density (13.9 W/cu-in)
- Full medical safety approvals
- Rugged MIL-STD-810E
- Optional conformal coating
Up to 1800 Watts85 to 264 VAC 120 to 300 VDCUp to 12- Inrush current max. 50 A, 230 VAC input, cold start at 25 °C
- Efficiency typically 87% at full load
- Frequency 47 - 440 Hz
- Safety ground leakage current 275 uA at 50/60 Hz, 264 VAC input
40 W90 to 264 VAC 127 to 300 VDC4.5V to 57.6V- Inrush current max. 50 A, 230 VAC input, cold start at 25 °C
- Frequency 47 - 440 Hz
- Safety ground leakage current 275 uA at 50/60 Hz, 264 VAC input
- Efficiency typically 87% at full load
20 W90-264 VAC, 120-300 VDC4.5V to 57.6V- Frequency 47 - 440 Hz
- Input range 90-264 VAC, 127-300 VDC
- Efficiency typically 87% at full load
- Inrush current max. 50 A, 230 VAC input, cold start at 25 °C
60 W90 - 264 VAC, 127 - 300 VDC4V to 28.8V- Outputs in parallel up to 1600 A
- Outputs series up to 1000 V
- 100% digital control
- Outputs programmable as voltage or current source
24,000 W180 V to 660 V0.6 V to 1000 V- Ultra-high density
- 1U power supply
- Active power factor correction
- EN61000-3-2 Harmonic compliance
2400 W180 to 264 VAC / 180 to 336 VDC-- 900 W continuous power
- Ultra high efficiency: 96.7% peak
- 40 - 60 VDC Datacom input range
- Contact cooling or heatsink mounting
900 W40 - 60 Vdc12.25 V- 4000 Vac reinforced insulation
- Medical safety to UL/cUL/EN/IEC 60601-1 3rd Edition
- 2 MOOP rated
- Wide 2:1 input voltage range
6 W12 V, 24 V or 48 VSingle, Dual- 4200 VAC reinforced insulation
- Insulation rated for 300 Vac working voltage
- Medical safety to UL/CSA/EN/IEC 60601-1 3rd Edition
- 2 MOOP rated
10 W12 V, 24 V or 48 VSingle, Dual- 4200 Vac reinforced insulation
- Insulation rated for 300 Vac working voltage
- Medical safety certifications
- 2 MOOP rated
15 W12 V, 24 V or 48 VSingle, Dual- 4200 Vac reinforced insulation
- Insulation rated for 300 Vac working voltage
- Medical safety certifications
- 2 MOOP rated
20 W12 V, 24 V or 48 VSingle, Dual- Wide input voltage range
- High efficiency: up to 95%
- Industrial safety
- Five-year warranty
LCM4000HV:
4000 Watts
LCM12K: 12 kWattLCM4000HV: Single Phase: 180 to 264 VA / 311 to 528 VA
LCM12K: Three Phase: 180 to 264 VA / 342 to 528 VA /
540 to 660 VACVoltage source:
100 to 300 VDC
Current source: 0 to 16
Image
Description
Datasheet
Power
Input Voltage
Output Voltage
- 2000 W output power
- High power and short form factor
- 1U power supply
- High density design: 62 W/in
2000 W-40 to -72 VDC11.8 V - 12.8 V- 100W continuous power
- High efficiency 91.5%
- 36 to 160 VDC wide-range input
- No minimum load requirement
100 W36 to 160 V4.5 V - 56.7 V- 2 phase design
- Dual or single output configuration possible
- High efficiency up to 96%
- Small size 27.5 mm x 12.8 mm x 13.4 mm (LxWxH)
350 W7.5-14 Vdc0.5 to 5Vdc- 150W continuous power
- High efficiency 90%
- 36 to 160 VDC wide-range input
- No minimum load requirement
150 W36 to 160 V4.5 V - 59.4 V- 900 W continuous power
- Ultra high efficiency: 96.7% peak
- 40 - 60 VDC Datacom input range
- Contact cooling or heatsink mounting
900 W40 - 60 Vdc12.25 V- 4000 Vac reinforced insulation
- Medical safety to UL/cUL/EN/IEC 60601-1 3rd Edition
- 2 MOOP rated
- Wide 2:1 input voltage range
6 W12 V, 24 V or 48 VSingle, Dual- 4200 VAC reinforced insulation
- Insulation rated for 300 Vac working voltage
- Medical safety to UL/CSA/EN/IEC 60601-1 3rd Edition
- 2 MOOP rated
10 W12 V, 24 V or 48 VSingle, Dual- 4200 Vac reinforced insulation
- Insulation rated for 300 Vac working voltage
- Medical safety certifications
- 2 MOOP rated
15 W12 V, 24 V or 48 VSingle, Dual- 4200 Vac reinforced insulation
- Insulation rated for 300 Vac working voltage
- Medical safety certifications
- 2 MOOP rated
20 W12 V, 24 V or 48 VSingle, Dual