Delta Elektronika designs and manufactures DC power units since 1959. Unfortunately a power supply is seen as a minor part of any equipment and often taken for granted. For many just an electronic box ordered at the last moment. It can be compared with our heart. It’s often neglected and we tend to pay even more attention to our hair. But if the heart fails the system goes down.
By reputation, a Delta power supply must be reliable. This is why our design concept has a strong emphasis on excellent technical specifications and long life. The specifications of our products may seem unrealistic but turn out to be even better when measured. Delta users expect perfection and an almost infinite life time at continuous full power and low cost of ownership. An ongoing research program has resulted in designs that can meet an ever increasing number of specifications.
As a result of our design philosophy the units react more than 10 times faster on load transients, produce hardly audible noise and produce 10 – 30 times less electromagnetic interference. Delta customers will never face any problems due to radiated or conducted emissions of our power supplies. The same design philosophy applies for immunity: the toughest standard is not good enough for us. A Delta power supply will operate totally reliably even in a very noisy environment.
All our power supply units are thoroughly tested before being dispatched to the customer. This ensures the long term correct functioning of each unit and client satisfaction. Delta Elektronika produces world class DC power supplies.
Product Matrix Delta Elektronika BV (No Sales in Austria)
Image
Description
Datasheet
Power
Voltage Range
Current Range
- Output power: 15 kW
- Bi-directional DC power supply
- Constant Power, programmable
- Bench or rack mounting PSU
up to 500 Vdcup to +/- 90 A15 kW- 3-Phase Input 380/400/415 Vac
- 19" Rack Mounting or Laboratory use
- Paralles and Series Option
- EN60950 and EN61010
6000 Wup to 600 Vdcup to 400 A- Single and three phase input
- 19" Rack Mounting or Laboratory use
- Paralles and Series Option
- EN60950 and EN61010
3300 Wup to 660 Vdcup to 220 A- Single Phase Input: 90-265 Vac
- 19" Rack Mounting or Laboratory use
- Paralles and Series Option
- EN60950 and EN61010
1500 Wup to 400 Vdcup to 100 A- Single Phase Input: 90-265 Vac
- 19" Rack Mounting or Laboratory use
- Paralles and Series Option
- EN60950 and EN61010
800 Wup to 400 Vdcup to 80 A
Image
Description
Datasheet
Power
Voltage Range
Current Range
- Single Phase Input 92-265 Vac
- 19″ Rack Mounting or Laboratory use
- Paralles and Series Option
- EN60950 and EN61010
300 W0 - 30 V0 - 10 A- Single Phase Input 90-265 Vac
- 19″ Rack Mounting or Laboratory use
- Paralles and Series Option
- EN60950 and EN61010
150 Wup to 300 Vup to 10 A- Single Phase Input 90-265 Vac
- 3 independent, floating outputs
- Very low output ripple and spikes
- EN60950 and EN61010
150 W2x 0 - 20 V
0 - 10 V0 - 2.5 A
0 - 5 A
Image
Description
Datasheet
- High accuracy, low drift
- 16 bit AD and DA conversion
- Isolated from the output voltage, working voltage 1000 V DC
- Floating with respect to earth
- Factory calibrated for optimum accuracy
- 8 inputst
- 8 Open Collector outputs
- Programmable via Ethernet or sequences
- Isolated from the output voltage, working voltage 1000 V DC
- Floating with respect to earth
- 4 relays with make-and-break contacts
- Additional (floating) interlock or 24 V enable system
- Programmable via Ethernet
- Isolated from the output voltage, working voltage 1000 V DC
- Floating relative to earth
- For applications where more current is required than 1 SM15K unit can deliver
- Optimal dynamic response in parallel operation
- Fast reaction time: up to 250 µs
- Programming and monitoring of voltage and current
- Web interface
- Read back of status signal
- Software calibration
- Isolated digital user in- and outputs
- Selectable 0-5 V and 0-10 V signal levels
- Isolated programming and monitoring of U, I and status signals
- Prevents problems with earth loops and CM-voltages
- Factory installed or external module
- Programming and monitoring of voltage and current
- Up to 15 PSC's on one BUS
- Software calibration
- Isolated digital user in- and outputs
- To connect analog programmable power supplies in master/slave parallel output mode. For example, the ES-series
- Each power supply gets the same information
- Easy way of connecting power supplies in parallel
- Fastest way to program multiple power supplies (unlimited quantity)
- To connect analog programmable power supplies in master/slave series mode. For example, the ES-series
- Equal voltage sharing in series operation
- Series operation possible up to 600 V
- 19-inch rack
- Rack adapters are offered to mount the following series: SM800, ES300, ES150 and PSC-series.