Description

The ARM (Autoranging Rectifier Module) is an AC front-end module which provides autoranging line rectification and inrush current limiting. The ARM is available in either 500/750 W or 750/1,500 W models in a micro-sized package measuring only 2.28″ x 1.45″ x 0.5″.

The ARM interfaces directly with worldwide AC mains and may be used with 300 Vin VI-200 / VI-J00 series DC-DC converters or 300 Vin Maxi, Mini and Micro series DC-DC converters to realize an autoranging, high-density, low-profile switching power supply. The ARM includes a microcontroller that continuously monitors the AC line to control bridge / doubler operation. The user need only provide external capacitance to satisfy system hold-up requirements.

Our Micro product series packaging technology offers flexible mounting options for various manufacturing processes. The ARM may be installed as a conventional leaded device for onboard applications, inboard for low-profile, height-restricted applications, socketed or surface mounted with optional ModuMate interconnect products.

Input Voltages:
  • 90 – 132 Vac
  • 180 – 264 Vac
Output Power(115 Vac input):
  • ARM-x1xx: 500 W
  • ARMB-x2xx: 750 W
Output Power(230 Vac input):
  • ARM-x1xx: 750 W
  • ARMB-x2xx: 1000 W
Efficiency:
  • 96 – 98% (typical)
Dimensions(quarter brick):
  • 2.28″ x 1.45″ x 0.5″(57,9 x 36,8 x 12,7 mm)

  • AC Bus OK indication
  • Module enable control
  • Microprocessor controlled
  • Inrush limiting (no external circuitry)
  • Autoranging input
  • Micro-sized package

Download Entire Manual

Download Individual Chapters

  1. High Density DC-DC Converter Technology
  2. Control Pin Functions and Applications
  3. Design Requirements
  4. EMC Considerations
  5. Current Sharing in Power Arrays
  6. Thermal Performance Information

Accessory Modules

  1. Autoranging Rectifier Module (ARM)
  2. Filter / Autoranging Rectifier Module (FARM)
  3. Modular AC Front-end System (ENMod)
  4. High Boost HAM
  5. Filter Input Attenuator Module (FIAM)
  6. Output Ripple Attenuator Module (MicroRAM)

Recommended Soldering Methods

  1. Lead Free Pins (RoHS)
  2. Tin Lead Pins

Mounting Options

  1. Surface Mount Socketing System (SurfMate)
  2. Through-hole Socket-mount System (InMate)
  3. Glossary of Technical Terms

  • cURus – UL 60950-1, CSA 60950-1
  • cTÜVus – EN 60950-1, UL 60950-1, CSA 60950-1
  • CE Marked – Low Voltage Directive (2006/95/EC)
  • CE Marked – Low Voltage Directive (2006/95/EC) and RoHS Recast Directive (2011/65/EU)
  • CB Certificate – IEC 60950-1

2-D Micro-size Drawings
Drwg. Number Description Download RoHS
25004 Outline drawing for Micro DC-DC Converter DXF | PDF
3-D Micro-size Module (referring to drawing number 25004)
Micro, short tin / lead pin, slotted baseplate STEP | 3D PDF
Micro, short tin / lead pin, threaded baseplate STEP | 3D PDF
Micro, short tin / lead pin, through-hole baseplate STEP | 3D PDF
Micro, long tin / lead pin, slotted baseplate STEP | 3D PDF
Micro, long tin / lead pin, threaded baseplate STEP | 3D PDF
Micro, long tin / lead pin, through-hole baseplate STEP | 3D PDF
Micro, short ModuMate, slotted baseplate STEP | 3D PDF
Micro, short ModuMate, threaded baseplate STEP | 3D PDF
Micro, short ModuMate, through-hole baseplate STEP | 3D PDF
Micro, long ModuMate, slotted baseplate STEP | 3D PDF
Micro, long ModuMate, threaded baseplate STEP | 3D PDF
Micro, long ModuMate, through-hole baseplate STEP | 3D PDF
Micro, short gold pin (RoHS), slotted baseplate STEP | 3D PDF
Micro, short gold pin (RoHS), threaded baseplate STEP | 3D PDF
Micro, short gold pin (RoHS), through-hole baseplate STEP | 3D PDF
Micro, long gold pin (RoHS), slotted baseplate STEP | 3D PDF
Micro, long gold pin (RoHS), threaded baseplate STEP | 3D PDF
Micro, long gold pin (RoHS), through-hole baseplate STEP | 3D PDF

Design Calculators

These calculator programs allow users to determine values that help with accessory
component selection for power system design.

Description P/N Capacitance Voltage Rating RoHS Technical Drawing
Capacitors
X-Cap 03047 0.47 µF 250 Vac PDF | -/td>
Y Type Capacitors A - Image Y-Cap 01000 4,700 pF 250 Vac PDF | –
Y-Cap 03285 4,700 pF 250 Vac PDF | –
Y-Cap Surface Mount 25283 4,700 pF 250 Vac PDF | –
Ceramic 28054 0.01 µF 500 V PDF | –
Ceramic 30458 470 pF 500 V PDF | –
Holdup 30240 270 µF 400 V PDF | DXF
MOVs
14 mm Disc 30076 275 V PDF | DXF

Description P/N RoHS Technical Drawing
Micro-sized Shield for Slotted Baseplate 30141 PDF | DXF
Micro-sized Shield for Threaded or Through-Hole Baseplate 30143 PDF | DXF

Description P/N Voltage Rating Current Rating RoHS Technical Drawing
Fuse 30263 250 V 12 A PDF | –

Description P/N Capacitance Height
of HUB		 RoHS Technical Drawing
Holdup Box HUB820-S 410 µF 1.55″ PDF | DXF
Holdup Box HUB1200-S 600 µF 1.75″ PDF | DXF
Holdup Box HUB1800-S 900 µF 2.14″ PDF | DXF
Holdup Box HUB2200-S 1,100 µF 2.85″ PDF | DXF
Holdup Box HUB2700-S 1,350 µF 3.52″ PDF | DXF
Holdup Box HUB3300-S 1,650 µF 3.52″ PDF | DXF
HUB contains two (2) capacitors of the value shown.
Mounting Connector Kit
Used for P/N HUB820-S, HUB1200-S, and HUB1800-S 21393 PDF | –
Used for P/N HUB2200-S, HUB2700-S, and HUB3300-S 21394 PDF | –
Kit contains one connector and pins.

Common Mode
Description P/N Inductance Rated Current DCR
(max)		 RoHS Technical Drawing
Common Mode Input Inductor Image Common-mode input 31743 1,000 µH 12 A 6.5 mΩ PDF
Common-mode input 32006 1,300 µH 13 A 14 mΩ PDF
Differential Mode
Differential Mode Input Inductor Image
Differential-mode input 33206 22 µH 12 A 5.5 mΩ –
Differential Output Inductors
Differential-mode output 32012 27 µH 12 A – PDF

SurfMates - Surface-mount Sockets Image SurfMates – Surface-mount Sockets All SurfMates are RoHS Compatible
Board Thickness Mounting Assembly Drawing Converter Pin Style* Module Style Input
P/N**		 Output P/N** 5 In/Out Sets P/N Technical Drawing
All surface PDF | DXF F Micro 22103 22104 16025
Example of SurfMate Application
* F = Short Gold (RoHS), G = Long Gold (RoHS)
** For individual input / output purchases, a 35-piece minimum (and multiples) applies to Maxis / Minis and
a 40-piece minimum (and multiples) for Micros.
InMates - Through Hole Sockets Image InMates – Through-hole All InMates are RoHS Compatible
All sockets are supplied on InMate headers to assure proper alignment during installation.
Board Thickness (nominal) Board Thickness
(min / max)		 Mounting Converter Pin Style* Module Style Input P/N** Output P/N** 5 In/Out Sets P/N Technical Drawing
0.063″ 0.055″ / 0.071″ inboard F Micro 18376 18386 18370 PDF | DXF
0.063″ 0.055″ / 0.071″ onboard G Micro 18380 18392 18372 PDF | DXF
0.094″ 0.084″ / 0.104″ inboard F Micro 18377 18387 18371
0.094″ 0.084″ / 0.104″ onboard G Micro 18381 18393 18373
0.125″ 0.1125″ / 0.1375″ onboard G Micro 21540 21545 21512
Example of Inboard Mounting Options Example of Onboard Mounting Options
* F = Short Gold (RoHS), G = Long Gold (RoHS)
** For individual input / output purchases, a 35-piece minimum (and multiples) applies to Maxis / Minis and
a 40-piece minimum (and multiples) for Micros.
Module Exchange Tools
Description Module Style P/N Technical Drawing
Micro Exchange Tool Image Used to facilitate the proper extraction of Micro modules from InMate or SurfMate sockets. Micro 22829 –

Standoffs - 2nd Gen Group Standoff Kits for Solder Mounted Modules All Standoffs are RoHS Compatible
Board Thickness Mounting Converter Pin Style Baseplate Heat Sink Kit P/N* Bag P/N** Technical Drawing
0.063″ inboard F, Blank slotted thru-hole 18150 19126 PDF | DXF
0.063″ inboard F, Blank slotted threaded 18151 19127 PDF | DXF
0.063″ inboard F, Blank thru-hole thru-hole 18146 19122 PDF | DXF
0.063″ inboard F, Blank thru-hole threaded 18147 19123 PDF | DXF
0.063″ inboard F, Blank threaded thru-hole 18146 19122 PDF | DXF
0.063″ onboard G, L slotted thru-hole 18156 19132 PDF | DXF
0.063″ onboard G, L slotted threaded 18157 19133 PDF | DXF
0.063″ onboard G, L thru-hole thru-hole 18150 19126 PDF | DXF
0.063″ onboard G, L thru-hole threaded 18152 19128 PDF | DXF
0.063″ onboard G, L threaded thru-hole 18150 19126 PDF | DXF
0.093″ inboard G, L slotted thru-hole 18150 19126 PDF | DXF
0.093 “ inboard G, L slotted threaded 18151 19127 PDF | DXF
0.093 “ inboard G, L thru-hole thru-hole 18146 19122 PDF | DXF
0.093 “ inboard G, L thru-hole threaded 18147 19123 PDF | DXF
0.093 “ inboard G, L threaded thru-hole 18146 19122 PDF | DXF
* Kits include six (6) standoffs and screws. Mini and Micro modules require a minimum of four standoffs.
** Bags of one hundred (100) do not include screws; #4-40 thread hardware required.
Design Information for Solder Mounting
Standoff Kits Image Standoff Kits for InMate Mounted Modules All Standoffs are RoHS Compatible
Board Thickness Mounting Converter Pin Style Baseplate Heat Sink Kit P/N* Bag P/N** Technical Drawing
0.063″ inboard S slotted thru-hole 18153 19129 PDF | DXF
0.063″ inboard S slotted threaded 18154 19130 PDF | DXF
0.063″ inboard S thru-hole thru-hole 18148 19124 PDF | DXF
0.063″ inboard S thru-hole threaded 18149 19125 PDF | DXF
0.063″ inboard S threaded thru-hole 18148 19124 PDF | DXF
0.063″ onboard N slotted thru-hole 18158 19134 PDF | DXF
0.063″ onboard N slotted threaded 18159 19135 PDF | DXF
0.063″ onboard N thru-hole thru-hole 18153 19129 PDF | DXF
0.063″ onboard N thru-hole threaded 18155 19131 PDF | DXF
0.063″ onboard N threaded thru-hole 18153 19129 PDF | DXF
0.093″ inboard S slotted thru-hole 18153 19129 PDF | DXF
0.093″ inboard S slotted threaded 18154 19130 PDF | DXF
0.093″ inboard S thru-hole thru-hole 18148 19124 PDF | DXF
0.093″ inboard S thru-hole threaded 18149 19125 PDF | DXF
0.093″ inboard S threaded thru-hole 18148 19124 PDF | DXF
0.093″ onboard N slotted thru-hole 18156 19132 PDF | DXF
0.093″ onboard N slotted threaded 18157 19133 PDF | DXF
0.093″ onboard N thru-hole thru-hole 18150 19126 PDF | DXF
0.093″ onboard N thru-hole threaded 18152 19128 PDF | DXF
0.093″ onboard N threaded thru-hole 18150 19126 PDF | DXF
0.125″ onboard N slotted thru-hole 24054 19132 PDF | DXF
0.125″ onboard N slotted threaded 18157 19133 PDF | DXF
0.125″ onboard N thru-hole thru-hole 24056 19126 PDF | DXF
0.125″ onboard N thru-hole threaded 18152 19128 PDF | DXF
0.125″ onboard N threaded thru-hole 24056 19126 PDF | DXF
* Kits include six (6) standoffs and screws. Mini and Micro modules require a minimum of four standoffs.
** Bags of one hundred (100) do not include screws; #4-40 thread hardware required.
Design Information for InMate Mounting
Standoff Kits Image Standoff Kits for SurfMate Mounted Modules All Standoffs are RoHS Compatible
Board Thickness Mounting Converter Pin Style Baseplate Heat Sink Kit P/N* Bag P/N** Technical Drawing
All surface S slotted thru-hole 20178 20188 PDF | DXF
All surface F slotted threaded 20179 20189 PDF | DXF
All surface F thru-hole thru-hole 20176 20186 PDF | DXF
All surface F thru-hole threaded 20177 20187 PDF | DXF
All surface F threaded thru-hole 20176 20186 PDF | DXF
* Kits include six (6) standoffs and screws. Mini and Micro modules require a minimum of four standoffs.
** Bags of one hundred (100) do not include screws; #4-40 thread hardware required.
Design Information for Surface Mounting

Description P/N RoHS Technical Drawing
Oscilloscope Test Jack A (Horizontal Shielded) Shielded, Horizontal 01830 PDF
Oscilloscope Test Jack B (Vertical Shielded) Shielded, Vertical 06207 PDF

Heat Sinks used with Vicor’s Micro-Size Modules
Description P/N RoHS Technical Drawing
Heat Sink - Micro Longitudinal 0.40 0.40″ longitudinal fins, threaded mounting* 32174 PDF | DXF
0.90″ longitudinal fins, threaded mounting* 30190 PDF | DXF
Heat Sink - Micro Longitudinal 0.40 0.40″ longitudinal fins, thru-hole mounting 30719 PDF | DXF
0.90″ longitudinal fins, thru-hole mounting 30183 PDF | DXF
Heat Sink - Micro Transverse 0.40 0.40″ transverse fins, threaded mounting* 32173 PDF | DXF
0.90″ transverse fins, threaded mounting* 30270 PDF | DXF
Heat Sink - Micro Transverse 0.40 0.40″ transverse fins, thru-hole mounting 30722 PDF | DXF
0.90″ transverse fins, thru-hole mounting 30725 PDF | DXF
* NOT for use with threaded baseplates
Heat Sink Thermal Data and Calculator
Low-Profile Side-Fin Heat Sinks (Height only 0.125″ above module baseplate)
Description P/N RoHS Technical Drawing
0.55″ Side-Fin Heat Sink for Micro-Sized Modules 30095 PDF
Heat Sink Thermal Data and Calculator
ThermMate Thermal Pads (10 pieces per package)
Description P/N Thickness RoHS Technical Drawing
ThermMate Thermal Pads
For use with Vicor Micro-size modules 20265 0.007″ PDF | DXF
* NOT for use with VI-200 or VI-J00 modules